Setting of App
Chosing "Setting" from the menu of App will be shown a setting screen.
Set up the connection destination of wireless communications. Tap "Add" will be shown the connection destination dialog.
Please choose "Connect to" and input the address of a connection destination into "Address"(You can check at the log of client software). And if its type is TCP/IP or Internet, you need to input a port number into "Port". When completing, tap "OK".
In addition, it is necessary to open a specific port depending on the router and firewall software which you are using. Please refer to the manual of those if need.
In order to change the existing connection destination, please tap "edit" after choosing a target entry. Unnecessary connection is eliminable by "Delete".
- Reconnect automatically when a network error occured
An error occurs when a connecting to the client is established , it retries automatically after a while. But, when it fails continuously, it aborts communication.
- Flip on landscape mode(Android 2.3 and later)
In a landscape skin, screen rotates 180 degrees.
- Flip on portrait mode(Android 2.3 and later)
In a portrait skin, screen rotates 180 degrees.
- Use animation effect
Animation is applied to processing of a slide etc. When invalid, those change in an instant.
- Panel Transparency
Specify the transparency of float panels. If value is 0, controls are became wire frames.
- Speed by stick
Change the speed of mouse movement by stick control.
- Speed by pad
Change the speed of mouse movement by touchpad control.
- Wheel speed
Change the speed of the mouse wheel by stick control.
- Enable hardware mouse(Android 4.0 and later)
If the mouse is connected, on a screen, a cursor of a PC and a cursor on Android link on the screen. In unchecked, a click replaces touch operation. Depending on the device in use, operation may not be reflected correctly.
Specify a keyboard layout from a list. Please mail, if there is a request.
In a software keyboard, specify the space of keys.
- Keyboard pass through
Specify whether a physical keyboard uses for remote operation.
- Enable motion sensor
Enable operation by tilt detection.
- Tilt sensor restriction(Left-Right)
Specify the maximum angle of tilt of right and left.
- Tilt sensor restriction(Front-Rear)
Specify the maximum angle of tilt of front and rear.
- Idler range
If tilt of the angle is less than this value, sensor doesn't detect.
- Gamepad pass through(Android 3.1 and later)
Specify whether a physical gamepad uses for remote operation.
- Analog stick type(Android 3.1 and later)
Specify the type of the gamepad which you use. Finally each axial information is changed into the following types.
- Show method
Specify the display method of screen control.
- None - Fills black.
- Center circle - Draws central lines and a circle in the center.
- Grid - Draws boundary lines per 100 pixels.
- Capture - Shows desktop image.
- Video Quality
Set up the quality of capture images. If a value is large, it will become high definition.
- Refresh rate
Specifies update capture images per second. If a value is large, it will become a smooth, but a processing load is exerted.
Specify the resolution of capture images. Images become rough it right, but the load of processing becomes low.
- Captured image filtering
I specify whether in scaling, it effects interpolation processing.
- Audio quality
Set up the quality in audio transfer. If a value is large, it will become high quality.
- Touch range
Specify how it reflects the touched range to the PC. If it's "Relative", a range will be changed into the proportional size of the desktop. For example, a touch in a small screen is treated as having touched with the huge finger in a PC.