Usage of Client software
If "Client.exe" is lanuched from the folder of an installation place, client software begins and it will be in the state of awaiting the communication from devices. Communicative status are enumerated in "Log" tab.
A push the close button on the window will minimize that. Please choose "Exit" from the menu which right-clicks on the task tray icon if you want to close software completely.
Please use urgent reset, when an application is downed suddenly, and the input has remained effective. If "Reset" is chosen from the task tray menu or double lanuch of the client software, the urgent reset will operate. Thereby, all the states of buttons are reset.
In the "connection" tab, you can setup about communication.
- Connect to
Specify the communicative way. When Internet is chosen, it is ciphered by SSL automaticallyt. When the contents of connection are updated, please click "Connect" button at the lower right of the window and re-connect.
- LAN device
When two or more wireless LAN devices are connected to your PC, please specify from the list the device which accepts communication.
Specify the port number for communication. It is necessary to do the work called port opening depending on a router. Because an open way differs in routers, please refer to the manual of the device for details.
- Signed file
Specify the signed file, if you have a SSL server certificate. By passing a certificate authority, communicative safety increases more.
- Use DFMirage
Perform screen shot transfer which uses the display driver of DemoForge. In order to process display data on a hardware level, it can expect reduction of CPU load, and improvement in the speed of transfer. However, the special effects of windows, such as Aero, become invalid during.
When you have inputted the string here, the dialog which asks for the input of this password before a communication start comes to be displayed on the target device. When "Store" had a check, it is saved in your PC after enciphered.
- Test mode
When input operation occurs, it does not perform the actual operation but only the contents come to be displayed on a log. Please use for the test of skins.